By very popular request, I’ve made a tutorial for the genie pants. This is a very long post, with lots of pictures! If there’s anything that doesn’t make sense, please let me know in the comments field at the end.
Click on the link to see the instructions:
Some people call them harem pants, but I prefer genie pants, cause I’d rather be a genie and make magic than be in a harem. Sure, you could say that both reference confinement, servitude, and giving pleasure, in which case I would call them balloon pants. BUT WHATEVER.
For this example I am using a very stretchy lycra, but you could also use a woven fabric for the legs. I love the wide stretchy waist and leg bands, but you could use elastic on a woven fabric, or have this waistband fitted with a zipper like a pencil skirt.
Since this design has so much fullness, and my fabric is so stretchy, nothing has to be exact. I came up with this technique myself, and I’d love to hear any alternative methods.
I’m making this pair of pants for my husband, so use your own measurements!
You can either cut these pants on the grain or cross grain, depending on the stretch of your fabric and layout of the print. Since they are so voluminous and stretchy, I don’t worry about seam allowances.
STEP 1: CUTTING
These pants are made in 5 pieces: a left and right side, a waistband, and two leg bands. You need approximately 2.5 yards of fabric total (2 yd for the legs, 1/2 yd for the bands).
First, I cut the length of the pants, about 30″. You’ll need two pieces this length, one for each side (I take one 60″ piece and fold it in half. This cut should parallel to the finished edge of the fabric, and perpendicular to where it was cut off the bolt). With the waist and leg bands, the pants can be worn down to the ankle or bunched up on the calf. Like every other measurement, adjust this as you see fit.
For a very balloon fit, I like to have the pants about twice as wide as the hips (2:1). So each side piece is cut as wide as the circumference of the hips. If you don’t want your pants to be as gathered, or don’t have enough fabric, you could reduce this ratio to 1.5:1. My husband’s waist is about 40″, so I am cutting the pants to be about 80″ in the waist.
The next step is to cut the crotch scoop. I do the front first, and base it off pants he already owns. Since these genie pants are loose and breezy, I cut the crotch lower and wider than his trousers fit.
My husband’s hips are approximately 40″, so the waist of each side piece is 40″ for a total width of 80″. Basically, I’m using the entire width of the fabric, in my case 60″. Moving to the opposite selvedge, I cut the back with the same length but a wider scoop (about 3″ deeper) to accommodate the booty. Again, not rocket science.
Here’s a nice shot to show the crotch. The front piece is on bottom, with a “shallower” crotch scoop. The back piece, on top, is cut deeper, to accommodate dat booty as well as sitting without too much wedgie action.
Since the fabric has so much stretch and will be holding up a lot of fabric in the pants, I make the waistband about 20% smaller than the actual waist. The length depends entirely on you, but cut it high enough that it can be doubled. In my case, the waistband is 30″ wide and 16″ high (which will be folded down to 8″ on the finished pants)
The leg bands are just smaller versions of the waistband. Mine are 8″ high (to be doubled over to 4″) and 15″ wide.
You should have two leg bands (15 x 8″), one waistband (30 x 16″) and two leg pieces, one for the left and one for the right.
STEP 2: SEWING
Now to the sewing! I sew the seams on my serger, and use my regular machine for the gathering stitches. If you don’t have a serger, use a zigzag or 3-step zigzag to give your seams enough thread to stretch.
I’m illustrating these steps using the smaller leg bands, but the process is the same for the waistband as well.
Sew the waist and leg bands each into a tube. Take this opportunity to test that the pieces are the right size for your body. You want the waistband to be tight enough to hold up the pants securely, but comfortable for lounging and getting bloated from all the beer and crackers. Likewise for the leg bands, but maybe your calves don’t get bloated so just make sure that they fit your leg snugly. Fold the bands over, wrong sides together, and pin the raw edges. I like to place my pins in quarters (dividing the entire circumference into 4 segments) to help with the gathering later.
Set the leg and waist bands to the side for now.
Then I sew the front crotches together, then the back center seam, and then the inseam as one long seam.
Mark the top and legs of the pants with pins (dividing the circumference by 4).
Next comes gathering! I’ve done this step in so many different ways, but I feel that simply sewing a long seam with low top-thread tension is the easiest. I like to use different color threads for the top spool and bobbin. I don’t have a ruffle foot because I don’t do a lot of gathering, and this works for me. Usually this tension gathers the fabric right behind the foot automatically. And so: sew the top of the pants and the bottom of each leg.
Pull the thread to gather the fabric so that it’s about the size of your waist and leg bands.
Pin the leg bands onto the bottom of the legs, right sides together, aligning the band seams with the inseam and the other pins. Repeat for the waistband.
Sew the gathered pant opening onto the leg bands. Your seam should be along the gathering line. Once you stretch this seam, the gathering straight-stitch will pop, as it should.
Repeat for the other leg band, as well as the waistband.
AND YOU’RE FINISHED.
I don’t add pockets in my stretchy pants because the weight inside them would pull the fabric in all kinds of crazy ways. I have done it with woven pants, and here’s how: Cut the legs as four pieces (right front, right back, left front, left back) and then just sew a pocket into the seam. You could also sew the top of that pocket into the waistband seam, for added stability.
If you’re interested, you can see more photos of the finished pants.
Pingback: SILVER GENIE PANTS - made by julianne
Followed your link from Craftster 🙂 Thanks for sharing!
Does it all make sense? I’m better at showing rather than explaining!
Pingback: GENIE PANTS - made by julianne
This was a great tutorial:) I love all of your pictures and your husband was a hilarious model. I enjoyed this immensely! I have one question: it appears that the leg bands are right-side in, but I am just curious as to how you placed them so that the finished pants were correct? Maybe I’m just not seeing it, but I really would like to make these (probably a dozen times!) and I want them to look great just like yours. Thank you for sharing:)
When sewing the gathered fabric to the smaller band, I find it’s much easier to have the band on the inside, with the gathering facing me. The bands are all folded over once the seams are stitched, so that the raw edges are together and right sides facing out (this eliminates hemming and helps cinch in the gathered fabric against the body). Does that answer your question?
I am planning on using woven fabric instead. I wanted to have a waistband like yours, so would I just use my own waist size instead of making it smaller?
My recommendation would be to use a knit fabric for the waistband (and your woven for the legs) but if you prefer to use woven for the waist, make that piece to fit your body. You’ll also have to think of how to get into the pants; my suggestion would be a side or back zipper.
For woven leg bands, either make them to your calf size (+ positive ease), or make them slightly larger and use elastic inside the cuff to cinch (like a scrunchie). Good luck!
I’m a drama mamma from the Gulf Coast of Florida…I have 3 kids who do theater & I do a lot of set painting & costume-making, as needed, for whatever community theatre, children’s or high school productions they’re in. My two oldest are in Addams Family-the musical, with their highschool drama troupe and I’m costuming the ancestors…a fun ensemble of ghostly, all gray, Addams, ancestors from various time periods. I have 3 costumes left to make…a Native American dress, a union officer from the civil war…and a conquistador. (All in shades of gray & spray painted in grays to look dusty- and they wear full, matching
, makeup. Today is Conquistador day…I googled “balloon pants” and stumbled upon your fun wedding and a lovely new, original, song and now this fantastic tutorial…so I’m going to get busy on conquistador pants.. Thanks for sharing your balloon pants expertise and thanks for the wonderful distraction of your brilliant wedding! I now force myself out of procrastination! Thought you might enjoy knowing how your tutorial it’s being utilized!
I’d love to see photos of the kiddos and their costumes when you’re finished. And as for procrastination… I have 4 Ravelry tabs open right now that I’m trying really hard to ignore. I just wanna knit!
Great tutorial, Thanks!
I’m using your tutorial to make purple and gold genie pants for halloween! I’m so glad you made this tutorial! I’m thinking about making another pair just for lounging in 🙂
I see you don’t monetize your site, don’t waste your traffic, you can earn extra cash every month because you’ve got high
quality content. If you want to know how to make extra $$$, search for: Ercannou’s essential adsense alternative
I have noticed you don’t monetize madebyjulianne.com, don’t waste your traffic, you can earn additional bucks every month with new monetization method.
This is the best adsense alternative for any type of website (they approve all websites), for more details
simply search in gooogle: murgrabia’s tools
Looking for fresh buyers? Get hundreds of keyword targeted visitors directly to your site. Boost revenues fast. Start seeing results in as little as 48 hours. For more info write a reply to: email@example.com
Did you know that notes like these that come through your website’s contact page are in effect an excellent way to get more web traffic, sales, video views etc. for your business? How do we do this? Easy, we craft an ad for your site and we blast it out to hundreds of thousands website contact pages on any site in any business niche or location you like. Do ads like these work well? By reading this now, you just proved that they do! The best part is, this won’t cost you much more than $3 a day! Want to get more info? just send a quick message here: UlisesDonaldsoni4472@gmail.com